Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Audi
>>
2000
>>
A6 Base
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 37 (Ignition System, Generic Scan Tool - 3.0L V6 AVK)
Section 37 (Ignition System, Generic Scan Tool - 3.0L V6 AVK)
WARNING:
This page is about a different car, the 2004 Audi A6, 2003 Audi A6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Expand All (for easy ctrl-f)
Collapse All
Ignition system
Ignition system, checking
General notes on ignition system
Safety precautions
Technical data, ignition
Ignition coils with power output stages, checking
Recommended special tools and equipment
Test requirement:
Procedure
Checking Ground (GND) connections
Checking voltage supply
Checking activation of power output stages
Final procedures
Check knock sensors
Recommended special tools and equipment
Test requirement:
Checking knock sensor wiring
Check wires from knock sensors to Engine Control Module (ECM).
Final procedures
Check Camshaft Position (CMP) sensor
Recommended special tools and equipment
Test requirement:
Checking activation
Checking voltage supply
Checking signal wire
Checking Ground (GND) wire
Checking wire connections between Camshaft Position (CMP) sensor and Engine Control Module (ECM)
Final procedures