Cooling System Specifications

COOLING SYSTEM SPECIFICATIONS

Model

Specification

Coolant Replacement Interval

⁽¹⁾

Coolant Capacity (Includes Heater)

11.6 Qts. (11.0L)

Thermostat Starts To Open

188°F (87°C)

Thermostat Fully Open

216°F (102°C)

⁽¹⁾	Inspect coolant level every 15,000 miles. Cooling system uses a permanent type coolant which does not require replacement under normal service. If adding to coolant, use manufacturer specified Coolant (G 011 V8C). Coolant mixture must be at least 50 percent, but no greater than 60 percent.