Front Axle
WARNING: This page is about a different car, the 1995 Audi 90. However, it is still accessible from the selected car via links, so may be relevant.
Loosen front and center ball joint-to-control arm nuts. Attach Camber Adjustment Lever (3196) to lower control arm. See Fig 1 . Loosen rear ball joint-to-control arm nut. Adjust camber to specification. Tighten ball joint-to-control arm nuts to 48 ft. lbs. (65 N.m). Recheck camber. Ensure that difference between left and right wheel camber is less than .5 degree.