Mike's Workshop Manuals: Service manuals for every vehicle

Home >> Audi >> 1993 >> 100 CS, 2.8 K, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Self-Diagnostic System >> Engine Basic Setting (Ecu "A") >> Display 10

Display 10

If display 7 value is out of range, correct as necessary. See DISPLAY 7. Check for faulty CTP switch, misadjusted TP sensor, poor ground connection on intake manifold or poor ECU ground.

scientia non olet · About Mike's Workshop Manuals