Shift Lock Solenoid Inspection

NOTE:  Since there is no direct method to test the component itself, troubleshooting is performed on the related components.

Test Procedure 

• Preparation
• • -

    Shift lock solenoid connector (4P) : disconnected

  • -

    Shift position/mode: P

• Procedure
• • -

    Perform the inspection according to the following table with the brake pedal depressed and the brake pedal released.

    NOTE:  Do not press the accelerator pedal.

(Disconnected) Shift lock solenoid connector (4P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

Module output voltage inspection 

ON*1

12 V battery voltage 

ON*2

About 0 V 

*1: Brake pedal is depressed*2: Brake pedal is released

Results 

• If it is normal, there is a problem with the shift lock solenoid.
• If it is abnormal, there is a problem with other related components.