Fuel Line/Quick-Connect Fitting Precautions (1.5L Engine): Notes

NOTICE: 

• Refer to the Fuel and Emissions Systems Service Precautions  before doing the procedure.
• Replace the fuel feed hose, fuel line, or the quick-connect fitting with a new one if it is damaged.

When removing or installing the fuel feed hose/line, or when disconnecting or connecting the quick-connect fittings, pay attention to the following:

• No heat-resistance; Be careful not to damage them during welding or other heat-generating procedures.
• No acid-proof; Do not touch them with a shop towel that was used for wiping 12 volt battery electrolyte or something similar.
• No stress-resistance; Be careful not to bend or twist the fuel feed hose/line excessively.