MTR_CONT Shorted Wire Inspection

Test Procedure

Preparation
- Body control module connector C (66P): disconnected
- Electric steering lock connector (12P): disconnected
Procedure
- Perform the inspection according to the following table.
  Refer to the Open/Shorted Wire Inspection Description for the method to inspect the shorted circuit below, then start to inspect according to circumstances.

(Disconnected) Electric steering lock connector (12P) female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

MTR_CONT shorted to power inspection

OFF

Not shorted

Results