Valve Inspection (2.0L Engine): Inspection

How to use this manual .

WARNING: 

Please carefully read "Precaution for Handling Sodium-Filled Valves" and follow the instructions as the exhaust valves contain metal sodium .

1. Valve - Inspect

   Preconditions 

   • Valve Removed - Refer to: Cylinder Head/Camshaft Area(2.0L Engine) or Cylinder Head/Camshaft Area(3.0L Engine)

   Courtesy of HONDA, U.S.A., INC.

   Procedure/Specifications 

   • Measure the valve in these areas.

   Specifications 

   		Standard Value (New)	Service Limit
   a	Intake	34.85-35.15 mm (1.3720-1.3839 in)	-
   	Exhaust	28.85-29.15 mm (1.1358-1.1476 in)	-
   b	Intake	116.95-117.55 mm (4.6043-4.6279 in)	-
   	Exhaust	114.40-115.00 mm (4.5039-4.5276 in)	-
   c	Intake	5.475-5.490 mm (0.21555-0.21614 in)	5.455 mm (0.21476 in)
   	Exhaust	5.465-5.475 mm (0.21516-0.21555 in)	5.440 mm (0.21417 in)

   Result 

   • If the measurement is not within specifications, replace the valve.