DTC Troubleshooting: B2A60-A2: Notes
DTC B2A60-A2 : Power Supply Voltage Too Low (Multipurpose Camera Unit)
NOTICE:
Before you troubleshoot, review the How to Troubleshoot - Refer to: How to Troubleshoot the Auto High-Beam (High-Beam Support System) or How to Troubleshoot the Road Departure Mitigation or How to Troubleshoot the Lane Keeping Assist System (LKAS) or How to Troubleshoot the Collision Mitigation Braking System (CMBS) or How to Troubleshoot the Adaptive Cruise Control (ACC) .
NOTE:
- Before performing a troubleshooting, check the 12 volt battery voltage. If the voltage is less than 12 volt, charge the 12 volt battery.
- This DTC is recorded when the voltage supplied to the multipurpose camera unit drops below 9.5 volt while the vehicle is driving.
- The functions of the integrated driver support system that will be temporarily canceled when this DTC is recorded can be confirmed with the DTC troubleshooting index .