DTC B2375: Inspection

Connector Visual Inspection 

Test Procedure 

• Check for loose or poor connections at the automatic lighting/rain sensor 5P connector.

Results 

• If it is abnormal, there is a problem with the connector and terminals.

Automatic Lighting/Rain Sensor Visual Inspection 

Test Procedure 

• Check for dirt and dust on the surface of the automatic lighting/rain sensor.

Results 

• If it is abnormal, clean the surface of the automatic lighting/rain sensor.

Windshield Glass Visual Inspection 

Test Procedure 

• Check for dirty or damaged on the windshield glass.

Results 

• If it is abnormal, clean the windshield and, if necessary, repair or replace the windshield glass.

Automatic Lighting/Rain Sensor Inspection 

Test Procedure 

• If the other inspection item(s) indicated a normal condition, then it is determined that the remaining automatic lighting/rain sensor is the cause.

Results 

• There is a problem with the automatic lighting/rain sensor.