DTC B1425: Notes
DTC B1425 : CDS (Collision Detection Signal) Input Circuit Malfunction
How To Use This Service Information .
NOTE:
- Before you troubleshoot, review the How to Troubleshoot .
- Before doing this troubleshooting procedure, review SRS Precautions and Procedures,General Troubleshooting Information, and 12 Volt Battery Terminal Disconnection and Reconnection.
- Before replacing the SRS unit, check the SRS unit software version with the HDS. If the software version is not the latest, update the SRS unit software , and retest.
- Check the connectors for poor connections or loose terminals.