DTC B2A60-99: Notes
DTC B2A60-99 : Out of automatic correction range for Misalignment of Multipurpose Camera Unit image
How To Use This Service Information .
NOTE:
- Before you troubleshoot, review the How to Troubleshoot - Refer to: How to Troubleshoot the Adaptive Cruise Control (ACC) (2019 2020 2021) or How to Troubleshoot the Adaptive Cruise Control (ACC) (2022 2023) .
- If this DTC is recorded, the following is suspected:
- Improper installation of the multipurpose camera unit (aging of vehicle, incorrect assembly, etc.).
- The multipurpose camera unit bracket is deformed by a minor collision or strong impact.
- The axis of the multipurpose camera unit is out of alignment due to abnormal wheel alignment, abnormal tire pressure, etc.
- Altered suspension
- After inspecting, repairing, or adjusting a possible cause of the failure, be sure to perform the multipurpose camera aiming procedure. If the DTC cannot be deleted after multipurpose camera aiming, replace the multipurpose camera unit.
- The functions of the integrated driver support system that will be temporarily canceled when this DTC is recorded can be confirmed with the DTC troubleshooting index - Refer to: Driving Support DTC Troubleshooting Index (2019 2020 2021) or Driving Support DTC Troubleshooting Index (2022 2023) .