Power Windows System Description - Control/Function (2013-18)
Basic Operation
- Manual Up/Down Function
The 1-step operation of the power window switch moves the window upwardly or downwardly. This is available during the vehicle is turned to ON mode and Lock (OFF) mode operation (only in driver side).
- Auto Up/Down Function (only in driver side)
The 2-step operation of the power switch moves the window upwardly or downwardly. This is available during the vehicle is turned to ON mode and Lock (OFF) mode operation (only in driver side).
System Control
When some object is detected during the AUTO UP operation, the window stops closing and reverses about 70 mm (2.8 in). If the window is less than halfway opened (about 220 mm), it will reverse to half open position (about 220 mm). In the manual operation, this function is active only during the key-off operation. This function is activated based on the calculation of the rotation speed and load change of the motor's pulse A.
- Key-off Operation Function
During about 10 minutes after the ignition switch is turned off, the window's open/close operation with the switches is available.