Dismounting/Mounting Procedures: Notes
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
When a tire pressure sensor is replaced or a tire with an unregistered sensor is mounted, all four tire pressure sensor IDs must be memorized to the TPMS control unit. See RESET PROCEDURES . When doing a tire rotation, memorizing the sensors is not needed
NOTE:
Vehicles equipped with TPM system must use wheels made for the system, or the system will not work. The original equipment wheels have a "TPMS" mark on them, and a counterweight cast into the opposite side of the spoke to balance the weight of the sensor. See Fig 1.