Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2012 >> RL >> Repair and Diagnosis >> Body & Frame >> Seats >> Driver Position Memory System (DPMS) >> Driver's Power Seat Motor Test >> Slide motor, Front up-down motor, Rear up-down motor

Slide motor, Front up-down motor, Rear up-down motor

  1. Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the connector from each power seat motor.
    Fig 1: Disconnecting Connector From Power Seat Motor
    G07363723Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Test each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.
    Fig 2: Terminals Position Reference Table
    G07363724Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the motor does not run or fails to run smoothly, replace it:
scientia non olet · About Mike's Workshop Manuals