DTC B1792: HandsFreeLink control module error
NOTE:
Check the vehicle battery condition first (see
BATTERY TEST
).
- Connect the HDS to the DLC (see HOW TO CHECK FOR DTCS WITH THE HDS ).
- Clear the DTCs with the HDS.
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Check for DTCs with the HDS.
Is DTC B1792 indicated?
YES -Substitute a known-good HandsFreeLink control unit (see HANDSFREELINK CONTROL UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original HandsFreeLink control unit (see HANDSFREELINK CONTROL UNIT REMOVAL/INSTALLATION ).
NO -Intermittent failure, the system is OK at this time.