Trunk Lid Opener Main Switch Test
WARNING: This page is about a different car, the 2008 Acura TSX, 2007 Acura TSX, 2006 Acura TSX, 2005 Acura TSX, and 2004 Acura TSX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the glove box (see GLOVE BOX REMOVAL/INSTALLATION ).
- Disconnect the 2P connector (A) from the trunk lid opener main switch (B).
- Check for continuity between the No. 1 and No. 2 terminals.
- There should be continuity with the switch ON.
- There should be no continuity with the switch OFF.