Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Fuel And Emissions Systems) >> General Troubleshooting Information >> CKP Pattern Clear/CKP Pattern Learn >> Learn Procedure (without the HDS)

Learn Procedure (without the HDS)

WARNING: This page is about a different car, the 2010 Acura TL and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start the engine. Hold the engine speed at 3,000 rpm without load (A/T in P or N, M/T in neutral) until the radiator fan comes on.
  2. Test-drive the vehicle on a level road: Decelerate (with the throttle fully closed) from an engine speed of 2,500 rpm down to 1,000 rpm with the Transmission in 2nd.
  3. Repeat step  2 several times.
  4. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
  5. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and wait 30 seconds.
scientia non olet · About Mike's Workshop Manuals