Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transmission) >> A/T Interlock System >> Shift Lock Stop, Shift Lock Stop Cushion Replacement

Shift Lock Stop, Shift Lock Stop Cushion Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Make sure not to get any silicone grease on the terminal part of the connectors and switches, especially if you have silicone grease on your hands or gloves
  1. Remove the shift lock solenoid (see SHIFT LOCK SOLENOID TEST )
  2. Remove the shift lock stop (A) and the stop cushion (B) as a set
    Fig 1: Identifying Shift Lock Stop And Stop Cushion
    G05991004Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Apply silicone grease to the pin (C) on the shift lever bracket, and install new shift lock stop over the pin
  4. Install the shift lock solenoid (see SHIFT LOCK SOLENOID TEST )
scientia non olet · About Mike's Workshop Manuals