Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2009 >> CSX Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Rear Differential) >> Rear Differential Fluid Temperature Sensor Replacement

Rear Differential Fluid Temperature Sensor Replacement

WARNING: This page is about a different car, the 2011 Acura TL, 2010 Acura TL, and 2009 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the differential fluid (see REAR DIFFERENTIAL FLUID INSPECTION AND REPLACEMENT )
  2. Remove the rear differential fluid temperature sensor cover (A) and the rear differential harness bracket D, then disconnect the rear differential fluid temperature sensor 2P connector (B)
    Fig 1: Rear Differential Fluid Temperature Sensor Cover And Rear Differential Harness Bracket With Torque Specifications
    G05991393Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the rear differential fluid temperature sensor(C)
  4. Install the rear differential fluid temperature sensor with a new O-ring (E) in the reverse order of removal
  5. Refill the differential fluid (see REAR DIFFERENTIAL FLUID INSPECTION AND REPLACEMENT )
scientia non olet · About Mike's Workshop Manuals