Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Immobilizer System) >> Symptom Troubleshooting Information >> Symptom Troubleshooting Using the Immobilizer Indicator Lighting Pattern >> Immobilizer code is not identified

Immobilizer code is not identified

WARNING: This page is about a different car, the 2008 Acura RL. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is turned ON (II) but the immobilizer code is not identified, the immobilizer indicator comes on for 2 seconds, then blinks until the ignition switch is turned OFF. The state of the immobilizer key registration and the IMOCD line can be checked by doing a SYSTEM CHECK with the HDS, also check the STATUS LOG and diagnose the line with the highest count first. The immobilizer indicator goes off when the ignition switch is turned OFF.

scientia non olet · About Mike's Workshop Manuals