Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2007 >> RL >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Adaptive Cruise Control System >> General Troubleshooting Information >> How to Clear DTCs

How to Clear DTCs

NOTE: You cannot clear the DTCs manually.
  1. With the ignition switch OFF, connect the HDS to the data link connector (DLC) (A) under the left side of the dashboard.
    Fig 1: Locating Data Link Connector
    G05498203Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Turn the ignition switch ON (II).
  3. Make sure the HDS communicates with the vehicle and the ACC unit. If it does not communicate, troubleshoot the DLC circuit (see DLC CIRCUIT TROUBLESHOOTING ).
  4. Clear the DTC(s) by following the screen prompts on the HDS.
    NOTE: See the for specific instructions.
scientia non olet · About Mike's Workshop Manuals