Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2006 >> RL >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Fuel And Emissions Systems >> How to Set Readiness Codes >> Evaporative Emissions (EVAP) Control System Monitor and Readiness Code >> Procedure

Evaporative Emissions (EVAP) Control System Monitor and Readiness Code: Procedure

  1. Connect the HDS to the vehicle's data link connector (DLC).
  2. Start the engine.
  3. Select EVAP TEST in the INSPECTION MENU with the HDS, then select the FUNCTION TEST in the EVAP TEST MENU.
    • If the functions are normal, readiness is complete.
    • If the functions are not normal, go to the next step.
  4. Check for a Temporary DTC. If there is no DTC, one or more of the enable criteria were probably not met; repeat the procedure.
scientia non olet · About Mike's Workshop Manuals