Immobilizer code is not identified
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
If the immobilizer code is not identified, the immobilizer indicator comes on for a maximum of 2 seconds, then blinks after turning the ignition switch ON (II). The immobilizer indicator blinks ten times, then goes off when the ignition switch is turned to LOCK (0).
The state of the immobilizer key registration and the IMOCD (S-NET) line can be checked by doing a SYSTEM CHECK with the HDS (see SYSTEM CHECK ).