Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2004 >> RSX Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> PGM-FI System >> DTC Troubleshooting >> DTC P0606: ECM/PCM Processor Malfunction (2005-2006 models)

DTC P0606: ECM/PCM Processor Malfunction (2005-2006 models)

  1. Turn the ignition switch ON (II).
  2. Clear the DTC with the HDS.
  3. Turn the ignition switch OFF.
  4. Turn the ignition switch ON (II).
  5. Wait 40 seconds.
  6. Check for Temporary DTCs or DTCs with the HDS.

    Is DTC P0606 indicated? 

    1. YES -  Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM (see HOW TO UPDATE THE ECM/PCM ), then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM (see ECM/PCM REPLACEMENT  ).
    2. NO -  Intermittent failure, system is OK at this time.
scientia non olet · About Mike's Workshop Manuals