Dust and Pollen Filter Replacement

The dust and pollen filters should be replaced every 30,000 miles (48,000 km) or 24 months, whichever comes first. Replace the filters more often if the air flow is less than usual.

1. Open the glove box. Remove the glove box stop on each side, then let the glove box hang down (see GLOVE BOX REMOVAL/INSTALLATION ).
2. Remove the filter lid (A) from the blower unit, then pull out the first dust and pollen filter (B). Slide the second filter to the left, and pull it out.
   Fig 1: Removing Filter Lid From Blower Unit

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Remove the filter (A) from the housing (B), and replace the filter.
   Fig 2: Removing Filter From Housing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Install the filters in the reverse order of removal.