Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2003 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Immobilizer System) >> Symptom Troubleshooting Information >> Symptom Troubleshooting Using the Immobilizer Indicator Lighting Pattern >> Normal operation

Normal operation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

If the immobilizer code is identified, the immobilizer indicator comes on for a maximum of 2 seconds, then goes off after turning the ignition switch ON (II).

The immobilizer indicator does not come on when the ignition switch is turned to LOCK (0).