Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2003 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Variable Valve Timing And Lift Electronic Control (VTEC)) >> Rocker Arm Oil Control Solenoid Assembly Inspection

Rocker Arm Oil Control Solenoid Assembly Inspection

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rocker arm oil control solenoid/oil filter assembly (A) from the oil pump, and check the rocker arm oil control solenoid filter (B) for a restriction. If there is a restriction, replace the rocker arm oil control solenoid filter, the engine oil filter, and the engine oil.
    Fig 1: Rocker Arm Oil Control Solenoid/Oil Filter Assembly With Torque Specification
    G05485200Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. If the filter is not restricted, remove the rocker arm oil control solenoid (A), and push the valve (B) with your finger to check its movement. If the valve moves freely, it is normal; check the engine oil pressure (see OIL PRESSURE TEST ). If the engine oil is OK, replace the rocker arm oil control solenoid (see ROCKER ARM OIL CONTROL SOLENOID REPLACEMENT  ). If the valve binds or sticks, replace the rocker arm oil control solenoid assembly.
    Fig 2: Rocker Arm Oil Control Solenoid And Valve With Torque Specification
    G05485201Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About Mike's Workshop Manuals