Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater System >> Testing >> Relays

Manual A/C-Heater System: Testing: Relays

Remove relay. With battery voltage applied across terminals No. 3 and 4, there should be continuity between terminals No. 1 and 2. With power disconnected, there should be no continuity. See Fig 1 . Replace relay if it does not test as specified.

Fig 1: Identifying Relay Terminals
G98J04451Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About Mike's Workshop Manuals