Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater System >> Testing >> Compressor Clutch

Compressor Clutch

Measure resistance between ground and compressor clutch connector. If resistance is not 3.4-3.8 ohms at 68°F (20°C), replace compressor clutch. Use a feeler gauge to measure clearance between pulley and pressure plate. If clearance is not .014-.026" (.35-.65 mm), adjust clearance by adding or removing shims as necessary.

scientia non olet · About Mike's Workshop Manuals