Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater System >> Testing >> A/C Switch

A/C Switch

Remove heater control panel. Disconnect 14-pin connector. With A/C switch on, check for continuity between terminals No. 11 and 12 of the 14-pin connector. See Fig 1 . There should be current flow in only one direction.

Fig 1: Testing A/C Switch
G95G10047Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About Mike's Workshop Manuals