Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater System >> Testing >> A/C Diode

A/C Diode

NOTE: Check diode with analog ohmmeter or digital meter with diode tester.

Disconnect A/C diode connector, located behind right kick panel. There should be continuity between any combination of terminals (such as "B" and "C"), but only in one direction (polarity). See Fig 1 . If continuity is not as specified, replace A/C diode.

Fig 1: Testing A/C Diode
G95F10046Courtesy of AMERICAN HONDA MOTOR CO., INC.