Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Manual A/C-Heater System >> Removal & Installation >> Compressor >> Installation

Removal & Installation: Compressor: Installation

To install, reverse removal procedure. If installing a new compressor, drain oil from old compressor into a measuring container. Subtract the volume of drained oil from 4.7 ounces. The result is the amount that you should drain from the new compressor. Tighten bolts to specification. See TORQUE SPECIFICATIONS  . Evacuate and charge A/C system.

scientia non olet · About Mike's Workshop Manuals