Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (1.8L VTEC 4-Cylinder) >> Overhaul >> Cylinder Block Assembly >> Piston Pin Installation

Piston Pin Installation

WARNING: This page is about a different car, the 2001 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure piston and connecting rod are positioned so arrow on top of piston is pointing toward timing belt and numbers marked on connecting rod face timing belt. Turn handle on Piston Pin Driver (07973-PE00320) so piston driver length is 2.035" (51.69 mm).
  2. Install Pilot Collar (07LAF-PR30100) into piston and connecting rod. Lightly oil new piston pin. Place piston onto Base. Press in piston pin.
scientia non olet · About Mike's Workshop Manuals