Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 1998 >> SLX >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Anti-Theft System) >> Diagnostic Tests >> DTC B3031: Controller In Learn Mode >> Testing

DTC B3031: Controller In Learn Mode: Testing

WARNING: This page is about a different car, the 1998 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform system check. See SYSTEM CHECK  under SYSTEM TESTS. Go to next step.
  2. Using scan tool, check for DTCs. If DTC B3031 is only current code, go to next step. If other DTCs exist, go to applicable DTC diagnostic and repair procedure.
  3. If PassLock(R) learn procedure has been performed, go to next step. If PassLock(R) learn procedure has not been performed, go to SYSTEM TEST  under SYSTEM TESTS.
  4. Clear DTCs and go to SYSTEM CHECK  under SYSTEM TESTS.
scientia non olet · About Mike's Workshop Manuals