Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 1998 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (A/C-Heater System) >> Adjustments >> Temperature Control Cable >> Heater Unit Side

Heater Unit Side

WARNING: This page is about a different car, the 1998 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect heater valve cable housing from cable clamp at heater unit. Disconnect heater valve cable from temperature control arm. Set air mix control motor to maximum cool position. See Figure . Attach cable to temperature control valve by sliding cable eye over peg on temperature control valve. Hold end of heater valve cable housing against stop and snap cable housing into clamp.

scientia non olet · About Mike's Workshop Manuals