Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 1997 >> 3.5RL >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Engine Controls - Basic Testing) >> Preliminary Inspection & Adjustments >> Mechanical Inspection >> Compression

Mechanical Inspection: Compression

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1998 Acura Integra, 1998 Acura 3.5RL, 1998 Acura 3.2TL, 1998 Acura 3.0CL, and 1998 Acura 2.5TL. However, it is still accessible from the selected car via links, so may be relevant.

Test engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manual for specific instructions.

WARNING: DO NOT  use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.