Cylinder Head Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD
| Application | Specification | ||||
|---|---|---|---|---|---|
| Cylinder Head | |||||
| Height | 5.195-5.199" (131.95-132.05 mm) | ||||
| Maximum Warpage | (1) 0.002-0.008" (0.05-0.20 mm) | ||||
| Valve Seats (Intake & Exhaust Valves) | |||||
| Seat Angle | 45° | ||||
| Seat Width | |||||
| Standard | 0.049-0.061" (1.25-1.55 mm) | ||||
| Service Limit | 0.079" (2.00 mm) | ||||
| Valve Guides (Intake & Exhaust Valves) | |||||
| Valve Guide I.D. | |||||
| Standard | 0.260-0.261" (6.61-6.63 mm) | ||||
| Service Limit | 0.262" (6.65 mm) | ||||
| Intake Valves | |||||
| Installed Height | 0.541-0.561" (13.75-14.25 mm) | ||||
| Valve Stem-To-Guide Oil Clearance | |||||
| Standard | 0.001-0.002" (0.02-0.05 mm) | ||||
| Service Limit | 0.003" (0.08 mm) | ||||
| Exhaust Valves | |||||
| Installed Height | 0.620-0.640" (15.75-16.25 mm) | ||||
| Valve Stem-To-Guide Oil Clearance | |||||
| Standard | 0.002-0.003" (0.05-0.08 mm) | ||||
| Service Limit | 0.004" (0.11 mm) | ||||
|
|||||