Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 1992 >> Legend Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Basic Testing) >> Electronic Ignition System Checks >> IGNITOR Power Supply (INTEGRA)

IGNITOR Power Supply (INTEGRA)

WARNING: This page is about a different car, the 1991 Acura Legend and 1991 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition off. Disconnect harness from ignitor. Turn ignition on. Using voltmeter, check for battery voltage between ground and Black/Yellow wire of harness. See Figure.
  2. If voltage is not present, check for open in Black/Yellow wire between ignition coil and ignitor harness connector. If wire is okay, check ignition coil power source and ignition coil resistance. Also check radio noise condenser for internal short to ground.
scientia non olet · About Mike's Workshop Manuals