Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Acura >> 1987 >> Integra LS, 2D Hatchback, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Brake Switch >> Integra

Brake Switch: Integra

  1. Disconnect 4-pin connector from switch. Check that there is continuity between terminals "A" and "B" with brake pedal released, and between terminals "C" and "D" with pedal depressed.
  2. Ensure circuit is open between terminals "C" and "D" with brake pedal released, and between terminals "A" and "B" with brake pedal depressed. Adjust pedal height or replace switch as necessary. See Figure .
scientia non olet · About Mike's Workshop Manuals